Description
Changzhou Fenxi Optoelectronics Technology Co., Ltd. proudly presents the Fiber Fast Connector, a pre-polished, field-installable fiber optic connector designed for rapid deployment, reliable performance, and low installation cost in modern optical access networks.
Engineered for FTTH (Fiber to the Home), telecom access networks, LAN/WAN, and system integration projects, this connector enables quick terminations without epoxy, polishing, or complex tools, significantly improving on-site efficiency and consistency.
1. Product Overview
The Fiber Fast Connector is a mechanical splice type connector with a factory-polished ferrule and built-in fiber alignment mechanism. It allows installers to terminate fiber cables directly in the field within minutes, while ensuring stable optical performance comparable to factory-assembled patch cords.
2. Product Types & Options
Our Fiber Fast Connector series supports multiple connector interfaces and cable structures to meet different engineering needs.
Available Connector Interfaces:
- SC / APC
- SC / UPC
- LC / APC
- LC / UPC
Supported Fiber & Cable Types:
- Fiber type: G.652D, G.657A1, G.657A2
- Cable: 3.0 mm round cable, 2.0 mm cable, 0.9 mm tight-buffer, flat drop cable (2×3 mm)
3. Key Technical Specifications
The following are typical specification ranges in line with current industry standards for high-quality fast connectors.
3.1 Optical Performance
| Parameter | Typical Value (Singlemode) | Notes |
|---|---|---|
| Insertion Loss (IL) | ≤ 0.3 dB (typ. 0.2 dB) | Measured at 1310/1550 nm |
| Return Loss (UPC) | ≥ 50 dB | IEC/ITU-T compliant |
| Return Loss (APC) | ≥ 55 dB | 8° APC polish angle |
| Repeatability | ≤ 0.2 dB | Reconnections under same conditions |
| Operating Wavelength | 1260 – 1650 nm | Full singlemode spectrum |
3.2 Mechanical & Environmental Performance
| Parameter | Performance Level | Reference Condition |
|---|---|---|
| Tensile Strength (Cable–Connector) | ≥ 50 N (flat/round drop cable) | 1 min, no IL change > 0.2 dB |
| Durability (Re-mating) | ≥ 500 cycles | No significant IL/RL degradation |
| Operating Temperature | -40 °C to +75 °C | Outdoor FTTH compatible |
| Storage Temperature | -40 °C to +85 °C | |
| Humidity Resistance | 95% RH, 60 °C, 168 h | IL variation ≤ 0.2 dB |
| Vibration Resistance | 10–55 Hz, 1.5 mm, 2 h/axis | IL variation ≤ 0.2 dB |
3.3 Structural Parameters
| Item | SC Type | LC Type |
|---|---|---|
| Ferrule Diameter | 2.5 mm ceramic | 1.25 mm ceramic |
| Applicable Fiber | 0.25 mm / 0.9 mm / 2.0 mm / 3.0 mm | 0.9 mm / 2.0 mm |
| Alignment Method | Mechanical splice + V-groove | Mechanical splice + V-groove |
| Typical Termination Time | ≤ 2 minutes (skilled installer) | ≤ 2–3 minutes |
4. Design Highlights
4.1 Pre-Polished Ferrule with Factory Quality Control
Each Fiber Fast Connector uses a factory-polished ceramic ferrule and pre-installed fiber stub. Precision polishing and inspection ensure:
- Consistent end-face quality
- Low insertion loss and high return loss
- Reduced dependence on field craftsmanship
4.2 Tool-Friendly, Installer-Oriented Design
- Compatible with standard FTTH toolkits (fiber stripper, cleaver, visual fault locator)
- Clear marking for fiber insertion length
- Simple one-step locking mechanism (clear “click” feedback)
- Transparent window design (optional) for visual inspection of fiber position
4.3 Robust Mechanical Structure
- Rugged housing suitable for indoor/outdoor environments
- Strain-relief structure to protect the fiber from bending and pulling
- Options for drop cable and round cable enable flexible deployment
5. Advantages for Network Operators & Integrators
- Reduced Installation Cost
- No epoxy and no polishing means less equipment investment and lower skill threshold.
- Shorter installation time per site, improving labor productivity.
- High First-Pass Yield
- Pre-engineered ferrule and alignment mechanism reduce human error.
- Stable and repeatable optical performance, ideal for large-scale rollouts.
- Flexible On-Site Configuration
- Quickly adapt to changes in routing, subscriber locations, and fiber lengths.
- Simplifies maintenance and replacement in existing networks.
- Improved Service Response Time
- Faster activation of new subscribers.
- Efficient restoration in case of fiber breaks or connector damage.
6. Typical Application Scenarios
- FTTH last-mile connections from distribution box to home
- Optical distribution frames (ODF) in central offices and access nodes
- Fiber termination boxes and cassettes for building entry points
- Network upgrades and expansions where pre-terminated cables are not available
- Temporary or mobile fiber links for events, exhibitions, or emergency deployments
7. Ordering Information (Example)
When placing an order, please specify:
- Connector type: SC / UPC, SC / APC, LC / UPC, or LC / APC
- Fiber type: G.652D, G.657A1, or G.657A2
- Cable type: 0.9 mm, 2.0 mm, 3.0 mm, or flat drop (2×3 mm)
- Packaging: bulk pack or customized labeled packaging
Example:
- Model: FX-FFC-SC/APC-G657A2-3.0
- Description: Fiber Fast Connector, SC/APC, G.657A2, 3.0 mm round cable type
Reviews
There are no reviews yet.