LC APC 3.0mm Duplex Singlemode Fiber Optic Connector

Long-distance single-mode links are not only about low loss — they are about mechanical survival.
In backbone rooms, ODF frames, outdoor cabinets and corridor ducts, fiber jumpers are bent, pulled, and re-routed again and again.
The LC APC 3.0mm Duplex Singlemode connector is built for exactly this kind of environment.

It combines APC angled polishing for optical stability with a 3.0mm heavy-duty jacket that protects the fiber against tension, crushing and micro-bending, even in harsh installation conditions.

Description

3.0mm jacket — when the cable itself becomes part of system reliability

A 3.0mm duplex jumper is not simply “thicker”.
It uses a stronger aramid yarn layer, larger buffer and reinforced boot, which dramatically increases its mechanical safety margin.

Jacket size Real-world meaning
2.0mm For rack-to-rack and device ports
3.0mm For backbone routing, floor ducts, cabinet jumpers

This makes the 3.0mm duplex APC LC especially suitable for metro fiber rooms, CATV hubs, and telecom distribution frames.


APC geometry for reflection-critical systems

The angled physical contact prevents reflected light from re-entering the fiber core.

Optical performance Typical value
Fiber type Single-mode 9/125 µm
Polish APC (8°)
Insertion loss ≤ 0.30 dB
Return loss ≥ 60 dB
Working wavelengths 1310 / 1490 / 1550 nm
Durability ≥ 1000 matings

This reflection control is essential for RFoG, CATV overlay, GPON and long-haul DWDM links.


Duplex structure for true bidirectional transmission

The duplex LC format locks two fibers together in one connector body, ensuring:

  • Stable Tx/Rx alignment

  • Faster installation

  • Lower risk of polarity errors

Even when cables are heavily routed through cable trays, duplex APC LC keeps both channels protected and synchronized.


Engineering details

Component Function
1.25mm zirconia APC ferrule Maintains precise 8° angle
Reinforced duplex clip Holds both fibers securely
Thick 3.0mm jacket Absorbs pulling force
Long-life APC polish Keeps return loss stable over time

Professional Q&A

Is 3.0mm too thick for LC adapters?
No. Only the cable is thicker. The LC ferrule and housing remain standard and fit all LC APC adapters.

When should I choose 3.0mm instead of 2.0mm?
When patch cords are routed through ducts, cabinets, or shared trays where they can be bent or pulled.

Does APC really matter for backbone links?
Yes. In long single-mode paths with splitters, amplifiers or RF signals, reflections quickly accumulate and APC prevents that.

Reviews

There are no reviews yet.

Be the first to review “LC APC 3.0mm Duplex Singlemode Fiber Optic Connector”

Your email address will not be published. Required fields are marked *

Get product solutions for free

Get A Quote