Description
Why 2.0mm is the FTTH standard
FTTH and access networks require fiber cords that can survive bending, pulling, and frequent reconnections.
The 2.0mm jacket provides the right balance between flexibility and mechanical protection.
| Cable Size | Typical Use |
|---|---|
| 0.9mm | Pigtails, inside equipment |
| 2.0mm | FTTH jumpers, wall outlets, ONT cords |
This makes the LC APC 2.0mm version ideal for last-mile fiber connections.
Optical performance for PON & access networks
| Parameter | Typical Value |
|---|---|
| Fiber Type | Single-mode (9/125 µm) |
| Polish Type | APC (8° angled) |
| Insertion Loss | ≤ 0.30 dB |
| Return Loss | ≥ 60 dB |
| Operating Wavelength | 1310 nm / 1550 nm |
| Mating Life | ≥ 1000 cycles |
The high return loss ensures stable GPON, XG-PON and CATV signal quality.
Mechanical structure
| Item | Specification |
|---|---|
| Connector Type | LC Simplex |
| Cable Size | 2.0mm |
| Ferrule | 1.25mm zirconia ceramic |
| Latching System | LC push-pull latch |
| End-face | APC angled polish |
| Operating Temperature | –40°C to +75°C |
| Tensile Strength | ≥ 100 N |
The LC latch design allows fast connection in dense panels while keeping the fiber securely locked.
Typical applications
This connector is widely used in:
-
FTTH wall outlets and ONT connections
-
PON distribution boxes
-
Fiber patch panels
-
Access network patch cords
-
CATV & RF-over-fiber links
-
Optical test jumpers
Professional Q&A
Q1: Can LC APC 2.0mm be used in data centers?
Yes. It works well in single-mode data center links, especially where high return loss is required.
Q2: Is 2.0mm strong enough for customer-side FTTH cables?
Yes. 2.0mm is the standard size for FTTH patch cords, offering good flexibility with reliable tensile strength.
Q3: Can LC APC connect to LC UPC?
No. APC and UPC must not be mixed. Doing so will cause high optical loss and ferrule damage.
Reviews
There are no reviews yet.