الوصف
What the rose-red housing actually means
In modern optical cabling, color is no longer decoration — it is a working tool.
إن rose-red body identifies this connector as being intended for high-bandwidth multimode fiber, typically OM4 or OM5, which are used for:
-
40G and 100G Ethernet
-
High-speed SAN and storage networks
-
Data-center backbone links
Technicians can immediately recognize these jumpers in mixed racks that also contain aqua (OM3) and yellow (single-mode) cables.
Optical behavior you can rely on
Even with the heavy 3.0mm jacket, the connector still uses a precision 1.25mm zirconia ceramic ferrule و واجهة طرفية مصقولة من UPC.
This combination provides stable physical contact between fibers, which is critical for short-reach multimode links running at very high data rates.
| Performance item | Typical level |
|---|---|
| نوع الألياف | OM3 / OM4 / OM5 (50/125 µm) |
| البولندية | اتحاد الوطنيين الكونغوليين |
| فقدان الإدراج | ≤ 0.30 ديسيبل |
| خسارة الإرجاع | ≥ 35 ديسيبل |
| Working wavelengths | 850 nm, 1300 nm |
| Plug-unplug life | ≥ 1000 دورة |
These values are well within the limits required for 10G, 25G, 40G and 100G SR optics.
Built like a field jumper, not a lab cord
Where a 2.0mm duplex cable focuses on flexibility, the 3.0mm version focuses on survival.
| Construction element | What it does |
|---|---|
| 3.0mm outer jacket | Resists crushing and pulling |
| Long duplex boots | Absorb stress before it reaches the fiber |
| مزلاج الدفع والسحب LC | Keeps connectors secure in crowded panels |
| Ceramic ferrules | Maintain stable alignment over time |
وهذا يجعل الموصل مناسبًا بشكل خاص لـ core racks, aggregation cabinets, industrial enclosures and telecom rooms, where cables are frequently handled.
أسئلة وأجوبة احترافية
Can this be mixed with aqua OM3 jumpers?
Yes. The connector is fully compatible with OM3, OM4 and OM5 multimode fiber. The rose-red color simply indicates higher-grade multimode.
Is 3.0mm really necessary indoors?
In quiet racks, 2.0mm is fine. In busy data-center rows, industrial cabinets or telecom frames, 3.0mm dramatically reduces cable damage and signal instability.
Can LC UPC be used with MPO-LC breakout cables?
Yes. This connector is commonly used at the LC end of MPO-LC fan-out assemblies for high-speed multimode links.
المراجعات
لا توجد مراجعات بعد.