Beschreibung
Why non-adjustable?
Unlike adjustable connectors, this model uses a factory-fixed ferrule structure.
That means every connector is aligned and set during production, giving you:
-
More consistent optical performance
-
Faster cable assembly
-
Lower rejection rate
-
Better batch-to-batch uniformity
This makes it especially suitable for mass production of fiber patch cords and pigtails, which is exactly what professional manufacturers such as Changzhou Fenxi Optoelectronics Technology Co, Ltd. focus on.
Designed for 2.0mm & 3.0mm fiber cables
This connector supports the two most common fiber jacket sizes:
| Kabel Typ | Typische Verwendung |
|---|---|
| 2,0 mm | Indoor patch cords, equipment jumpers |
| 3,0 mm | Telecom-grade patch cords, backbone links |
Whether you are building short equipment jumpers or long-distance telecom patch cords, this FC PC connector fits both without changing the internal optical structure.
Optical performance you can rely on
| Parameter | Typical Performance |
|---|---|
| Faser-Typ | Einzelmode 9/125 µm |
| Polnischer Typ | PC (Physischer Kontakt) |
| Einfügedämpfung | ≤ 0,30 dB |
| Rückflussdämpfung | ≥ 45 dB |
| Betriebswellenlänge | 1310 nm / 1550 nm |
| Paarungsleben | ≥ 1000 Zyklen |
These values meet the standard requirements for telecom, FTTH, and enterprise optical networks.
Built for real network environments
| Merkmal | Spezifikation |
|---|---|
| Stecker Typ | FC PC |
| Kabel Größe | 2,0 mm / 3,0 mm |
| Aderendhülse | Zirkoniumdioxid-Keramik |
| Coupling | Metallschraube mit Gewinde |
| Betriebstemperatur | -40°C bis +75°C |
| Zugfestigkeit | ≥ 200 N |
Die FC threaded coupling ensures that once connected, the fiber stays locked in place — even in racks, cabinets, or outdoor telecom enclosures.
Where this connector is commonly used
You will find FC PC 2.0/3.0mm connectors in:
-
Telecom backbone and access networks
-
FTTH and PON systems
-
Glasfaser-Patchkabel und Pigtails
-
ODF frames and fiber cabinets
-
CATV and broadband networks
-
Optische Prüf- und Messgeräte
Anywhere stable, low-loss fiber connections are needed, this connector fits in naturally.
Fachliche Fragen und Antworten
Q1: Can FC PC and FC APC be connected together?
No. FC PC has a flat end face, while FC APC is angled. Connecting them will cause high loss and may damage the ferrule.
Q2: When should I choose 2.0mm instead of 3.0mm?
2.0mm is typically used for equipment jumpers and indoor patch cords, while 3.0mm is preferred for telecom and backbone cables with higher mechanical strength.
Q3: Is non-adjustable better than adjustable?
Für factory-made patch cords and pigtails, yes. Non-adjustable connectors give better consistency, faster assembly, and more stable optical quality.
Bewertungen
Es sind noch keine Bewertungen vorhanden.