Descripción
Características principales
-
APC (Angled Physical Contact) Ferrule: Minimizes back-reflection with typical return loss ≥ 60 dB for single-mode fiber systems.
-
Non-Adjustable Fixed Boot (0.9 mm): Optimized for tight-buffer fiber cable assemblies.
-
Low Insertion Loss: Typical ≤ 0.20 – 0.30 dB across standard telecom wavelengths.
-
Precision Ceramic Ferrule: Zirconia ferrule ensures accurate fiber alignment and long-term repeatability.
-
Robust Mechanical Design: Screw-on coupling and metal housing for secure connections and environmental resistance.
-
RoHS Compliant: Meets industry environmental and safety standards.
Typical Specifications
Optical Characteristics
| Parámetro | Valor típico |
|---|---|
| Pérdida de inserción (APC) | ≤ 0.20 – 0.30 dB |
| Pérdida de retorno (APC) | ≥ 60 dB |
| Longitud de onda operativa | 1310 nm, 1550 nm |
| Modo Fibra | Monomodo (9/125 µm) |
| Material de la virola | Cerámica (circonita) |
Values based on common FC APC 0.9 mm connectors in industry catalogs.
Environmental & Mechanical
| Característica | Especificación |
|---|---|
| Diámetro de la bota | 0.9 mm fixed |
| Temperatura de funcionamiento | De -40 °C a +75 °C |
| Tipo de conector | Simplex FC with APC polish |
| Estilo de acoplamiento | Tuerca metálica roscada |
| Conformidad | IEC & RoHS standards |
Representative of typical field-grade non-adjustable connectors.
Solicitudes
-
Redes de telecomunicaciones – reliable backbone and access layer connections.
-
FTTH / PON Installations – high return loss improves signal quality in subscriber links.
-
CATV & Broadband Systems – stable performance across long distance links.
-
LAN/WAN Infrastructure – patch panels, distribution frames and equipment terminations.
-
Laboratory & Test Systems – consistent optical performance for measurement setups.
Preguntas y respuestas profesionales
Q1: What is the benefit of APC polish in an FC connector?
A1: APC significa Contacto físico en ángulo, where the ferrule endface is polished at an angle (typically ~8°). This reduces back-reflection significantly, delivering high return loss (> 60 dB) and improving signal quality in single-mode systems.
Q2: Why use a non-adjustable 0.9 mm connector instead of an adjustable one?
A2: Non-adjustable connectors, like this 0.9 mm version, are pre-optimized at the factory for consistent dimensional accuracy and optical performance. They simplify installation, reduce field tuning time, and are ideal for mass-produced fiber assemblies.
Q3: Can this connector be used in demanding vibration environments?
A3: Yes. The threaded metal coupling and rigid construction help maintain stable connections even in environments with mechanical vibration and movement.
Reseñas
Aún no hay opiniones.