Descripción
🛠 Engineering Deep-Dive: Why “Closed-Ended”?
Unlike open-architecture connectors, our Closed-Ended ST components utilize a precision-contained spring housing. This means during the crimping process of thick 3.0mm jackets, the axial pressure is distributed across the metallic shell rather than the delicate fiber core.
Mechanical Integrity
En Nickel-Plated Brass body provides a higher Rockwell hardness than standard zinc alloys, ensuring the bayonet lugs won’t shear or wear down even after 1,000+ twist-lock cycles.
Optical Precision
Con Pre-radiused Zirconia Ferrules with a concentricity tolerance of ≤0.5μm. This ensures the light path remains centered, minimizing “Gap Loss” in long-haul OS2 links.
📊 Performance Benchmark (Spec-Sheet)
Estos datos representan nuestro Batch-A Quality Standard, verified through 3D interferometry:
💡 Industrial Sourcing & FAQ
Special Note for Bulk Buyers: These components are shipped as Full-Kit Sets (Housing, Ferrule, Spring, Crimp Sleeve, and Boot). We support custom color-coding for 3.0mm boots to differentiate between OM3/OM4 and OS2 networks in complex industrial racks.
Q: Why is the “Closed-Ended” design critical for 3.0mm cables? A: Standard 3.0mm jackets are heavy and stiff. Without a closed-ended internal housing, the axial tension can cause the ferrule to retract slightly (pistoning), leading to sudden signal drops. Our design locks the ferrule in place relative to the connector body.
Q: Do these components support both epoxy and anaerobic adhesives? A: Yes. The internal bore of our zirconia ferrule is polished to a micro-texture that promotes superior bonding with all industry-standard fiber epoxies.
Q: What is the benefit of the Nickel-Plated Brass over Zinc? A: In high-humidity or coastal environments, zinc tends to oxidize and become brittle. Our Nickel-Plated Brass provides an electrochemical barrier that maintains the bayonet lock’s smoothness for decades of service.
Q: Can we order these as “Sub-Assemblies”? A: Absolutely. As a direct Fabricante, we can provide pre-pressed ferrules or loose-piece components to align with your specific automation or manual assembly line.
Reseñas
Aún no hay opiniones.