{"id":1240,"date":"2026-10-15T04:19:00","date_gmt":"2026-10-15T04:19:00","guid":{"rendered":"https:\/\/www.fenxifiber.com\/plc-splitter-package-types\/"},"modified":"2026-10-02T09:59:33","modified_gmt":"2026-10-02T09:59:33","slug":"plc-splitter-package-types","status":"publish","type":"post","link":"https:\/\/www.fenxifiber.com\/es\/plc-splitter-package-types\/","title":{"rendered":"Tipos de paquetes de divisores PLC: Bare, Mini, ABS, LGX y Rack"},"content":{"rendered":"

Choose the PLC splitter package after the cabinet, closure or rack interface is fixed. The optical circuit may be similar across formats, but tube diameter, pigtail exit, connector presentation, mounting method and technician access determine whether the assembly can be installed and serviced.<\/strong><\/p>\n

Bare-fibre and steel-tube units suit protected internal integration; ABS modules add mechanical protection; LGX, cassette and rack formats provide connectorized presentation and mounting features. Package names are not universal dimensional standards, so procurement should request a controlled outline drawing and test a production-representative sample in the target enclosure.<\/p>\n

\"PLC<\/figure>\n

What Must Be Decided for PLC splitter package types?<\/h2>\n

Utiliza la tabla de decisiones para convertir el tema en datos controlados de compra, dise\u00f1o y aceptaci\u00f3n. Cada fila debe verificarse con respecto a las especificaciones reales del equipo, la ruta y el destino, en lugar de copiarse de un cat\u00e1logo gen\u00e9rico.<\/p>\n\n\n\n\n\n\n\n\n\n
\u00c1rea de decisi\u00f3n<\/th>\nQu\u00e9 hay que especificar<\/th>\nPor qu\u00e9 es importante<\/th>\nPruebas que deben conservarse<\/th>\n<\/tr>\n<\/thead>\n
Installation location<\/td>\nClosure, wall box, cabinet or rack<\/td>\nDefines protection and mounting needs<\/td>\nApproved enclosure drawing<\/td>\n<\/tr>\n
Fibre presentation<\/td>\nBare fibre, pigtails or adapters<\/td>\nChanges splicing and patching work<\/td>\nPort and tail schedule<\/td>\n<\/tr>\n
Mechanical envelope<\/td>\nBody, bend exits and mounting points<\/td>\nControls fit and routing<\/td>\nDimensioned outline<\/td>\n<\/tr>\n
Service access<\/td>\nCleaning, replacement and labels<\/td>\nAffects restoration time<\/td>\nPopulated enclosure trial<\/td>\n<\/tr>\n
Optical evidence<\/td>\nPort-level loss and uniformity<\/td>\nLinks package to tested device<\/td>\nSerialized test report<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

How to Control PLC splitter package types in the Project<\/h2>\n

Los controles que se muestran a continuaci\u00f3n vinculan el plano, la muestra, el lote de producci\u00f3n y el resultado de la instalaci\u00f3n. Se han dise\u00f1ado deliberadamente para ser pr\u00e1cticos: cada uno genera un registro que los equipos de compras, ingenier\u00eda y de campo pueden revisar posteriormente.<\/p>\n

Design from the enclosure inward<\/h3>\n

Reserve space for the package, tails, connectors, splice protectors and minimum routing radius. A module that fits an empty box may still block the cover or adjacent adapters after cabling.<\/p>\n

Separate optical and mechanical requirements<\/h3>\n

State the split configuration and optical acceptance separately from package dimensions, cable lengths, connector types and mounting hardware. This prevents a correct optical device from arriving in the wrong mechanical format.<\/p>\n

Approve the installed sample<\/h3>\n

Load one representative enclosure with the intended splitter, adapters and pigtails. Verify identification, cleaning access, tail routing and replacement sequence before volume release.<\/p>\n

Control package substitutions<\/h3>\n

Require notification when the housing, exit boot, cable or connector supplier changes. Recheck fit and optical records against the approved drawing and sample.<\/p>\n

\"Planar<\/figure>\n

Verificaciones de aceptaci\u00f3n y entrega<\/h2>\n

Acuerden el m\u00e9todo y el procedimiento antes de que comience la prueba. Un resultado sin un responsable definido del registro o sin una acci\u00f3n en caso de falla resulta dif\u00edcil de utilizar durante la autorizaci\u00f3n de env\u00edo o la puesta en servicio.<\/p>\n\n\n\n\n\n\n\n\n\n
Verificar<\/th>\nM\u00e9todo<\/th>\nR\u00e9cord<\/th>\nAcci\u00f3n en caso de falla<\/th>\n<\/tr>\n<\/thead>\n
Outline fit<\/td>\nInstall in target enclosure<\/td>\nFit photos and dimensions<\/td>\nRevise package or enclosure<\/td>\n<\/tr>\n
Tail routing<\/td>\nRoute every output<\/td>\nRouting record<\/td>\nCorrect length or exit<\/td>\n<\/tr>\n
Port identity<\/td>\nTrace input and outputs<\/td>\nLabel and continuity map<\/td>\nRelabel before shipment<\/td>\n<\/tr>\n
Prueba \u00f3ptica<\/td>\nMeasure each required port<\/td>\nSerialized report<\/td>\nQuarantine failing unit<\/td>\n<\/tr>\n
Service trial<\/td>\nClean and replace sample<\/td>\nTechnician sign-off<\/td>\nImprove access<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\"Connectorized<\/figure>\n

Normas y pruebas que respaldan la orden de compra<\/h2>\n

Corning enumera los formatos de componentes, m\u00f3dulos y bastidores, e indica que su gama de divisores PLC cumple con la certificaci\u00f3n GR-1209\/1221. V\u00e9ase Referencia de calificaci\u00f3n del divisor de Corning PLC<\/a>.<\/p>\n

El documento de 2025 describe las normas de referencia para GPON, XG(S)-PON, 50G-PON y la coexistencia en redes de acceso. V\u00e9ase Documento t\u00e9cnico de la UIT sobre el acceso de banda ancha<\/a>.<\/p>\n

La recomendaci\u00f3n vigente de 2024 define las categor\u00edas de fibra monomodo insensibles a la flexi\u00f3n y su \u00e1mbito de aplicaci\u00f3n. V\u00e9ase Recomendaci\u00f3n UIT-T G.657 sobre fibra insensible a la flexi\u00f3n<\/a>.<\/p>\n

RFQ checklist<\/h2>\n

Package selection is an enclosure-engineering decision as well as an optical purchase. Freeze the outline, fibre presentation, label scheme and port-level test record in the same approval package.<\/p>\n