LC APC 3.0mm Simplex Single-Mode Connector

Built for harsh environments and long-term reliability

Le LC APC 3.0mm Simplex Single-Mode connector est conçu pour outdoor FTTH lines, telecom cabinets, and industrial fiber links where mechanical protection is just as critical as optical performance.

While 2.0mm connectors focus on flexibility, the Gaine de 3,0 mm delivers extra pull strength, crush resistance, and bending protection, making it the preferred choice for drop cables, outdoor patch cords, and base-station fiber runs.

Avec son Polissage angulaire APC, this connector minimizes back-reflection — a key requirement for PON, CATV, and RF-over-fiber systems.

Description

Why 3.0mm matters in access networks

Diamètre du câble Mechanical Benefit Utilisation typique
0,9 mm Lightweight Internal pigtails
2,0 mm Flexible & strong Indoor FTTH cords
3,0 mm High tensile & crush resistance Outdoor & industrial fiber links

The 3.0mm design protects fibers from installation stress, accidental pulling, and vibration in field deployments.


Performances optiques

Paramètres Spécifications
Type de fibre monomode 9/125 µm
Type de polissage APC (8°)
Perte d'insertion ≤ 0,30 dB
Perte de retour ≥ 60 dB
Longueurs d'onde 1310 / 1550 nm
Répétabilité ≤ 0,1 dB
Durabilité ≥ 1000 cycles d'accouplement

Ces valeurs répondent aux exigences de GPON, XG-PON, FTTx, CATV and telecom backbone systems.


Mechanical & structural design

Fonctionnalité Description
Connector Format LC Simplex
Taille du câble 3,0 mm
Embout Céramique zircone de 1,25 mm
Housing High-impact polymer
Botte Long strain-relief boot
Locking LC push-pull latch
Température de fonctionnement De -40°C à +75°C
Résistance à la traction ≥ 120 N

Le bottes longues et veste épaisse absorb pulling force and prevent micro-bending, which helps maintain stable optical performance over time.


Where this connector is used

The LC APC 3.0mm Simplex connector is ideal for:

  • Outdoor FTTH drop cables

  • Armoires de distribution de fibres

  • Stations de base de télécommunications

  • Liaisons Ethernet industrielles par fibre optique

  • CATV and RF-over-fiber systems

  • Optical test cords used in the field


Questions et réponses professionnelles

Q1: When should I choose 3.0mm instead of 2.0mm?
Use 3,0 mm when the cable will be pulled, bent frequently, or installed outdoors. It provides much better mechanical protection.


Q2: Is LC APC required for PON networks?
Yes. Most GPON, XG-PON and CATV systems require APC connectors to reduce signal reflection.


Q3: Can LC APC 3.0mm be used in patch panels?
Yes. It fits standard LC adapters and panels, but offers stronger cable protection than thinner cords.

Commentaires

Il n'y a pas encore de commentaires.

Soyez le premier à commenter “LC APC 3.0mm Simplex Single-Mode Connector”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Obtenir gratuitement des solutions produits

Obtenir un devis