Description
3.0mm duplex — built for real cabling paths
| Cable type | Where it performs best |
|---|---|
| 2,0 mm | Short jumpers at device ports |
| 3,0 mm | Building backbones, floor-to-floor links, ODF routing |
The thicker jacket absorbs pulling forces and reduces micro-bending when fibers are routed through long paths.
Optical transmission characteristics
| Paramètres | Valeur typique |
|---|---|
| Fiber | monomode 9/125 µm |
| Polish type | CUP |
| Perte d'insertion | ≤ 0,30 dB |
| Perte de retour | ≥ 50 dB |
| Longueurs d'onde de fonctionnement | 1310 / 1550 nm |
| Mating durability | ≥ 1000 cycles |
Ces valeurs soutiennent Ethernet, SDH, metro and access networks with long-term signal stability.
Duplex LC structure
Two fibers are fixed inside one LC duplex housing, ensuring correct Tx/Rx orientation even when cables are moved or serviced.
| Construction | Bénéfice |
|---|---|
| Embouts en céramique de 1,25 mm | Precise core alignment |
| faces d'extrémité polies UPC | Low reflection |
| Clip LC duplex | Maintains polarity |
| Gaine épaisse de 3,0 mm | Protects against tension |
Questions et réponses professionnelles
Quand dois-je choisir 3,0 mm au lieu de 2,0 mm ?
When the jumper runs through cable trays, risers, or backbone frames where it may be bent or pulled.
Is this compatible with all LC UPC adapters?
Yes. The LC interface is standard and fits all LC UPC panels and transceivers.
Can this be used for PON systems?
Yes, but for RF overlay or reflection-sensitive PON systems, LC APC is recommended instead.
Commentaires
Il n'y a pas encore de commentaires.