Descrição
Why non-adjustable?
Unlike adjustable connectors, this model uses a factory-fixed ferrule structure.
That means every connector is aligned and set during production, giving you:
-
More consistent optical performance
-
Faster cable assembly
-
Lower rejection rate
-
Better batch-to-batch uniformity
Isso o torna especialmente adequado para mass production of fiber patch cords and pigtails, which is exactly what professional manufacturers such as Tecnologia Optoeletrônica Co. de Changzhou Fenxi, Ltd. focus on.
Designed for 2.0mm & 3.0mm fiber cables
This connector supports the two most common fiber jacket sizes:
| Tipo de cabo | Uso típico |
|---|---|
| 2,0 mm | Indoor patch cords, equipment jumpers |
| 3,0 mm | Telecom-grade patch cords, backbone links |
Whether you are building short equipment jumpers or long-distance telecom patch cords, this FC PC connector fits both without changing the internal optical structure.
Optical performance you can rely on
| Parâmetro | Typical Performance |
|---|---|
| Tipo de fibra | Modo único 9/125 µm |
| Tipo de polonês | PC (contato físico) |
| Perda de inserção | ≤ 0,30 dB |
| Perda de retorno | ≥ 45 dB |
| Comprimento de onda operacional | 1310 nm / 1550 nm |
| Vida de acasalamento | ≥ 1000 ciclos |
These values meet the standard requirements for telecom, FTTH, and enterprise optical networks.
Built for real network environments
| Recurso | Especificação |
|---|---|
| Tipo de conector | FC PC |
| Tamanho do cabo | 2.0mm / 3.0mm |
| Ponteira | Zirconia ceramic |
| Coupling | Parafuso de metal com rosca |
| Temperatura operacional | -40°C a +75°C |
| Resistência à tração | ≥ 200 N |
O FC threaded coupling ensures that once connected, the fiber stays locked in place — even in racks, cabinets, or outdoor telecom enclosures.
Where this connector is commonly used
You will find FC PC 2.0/3.0mm connectors in:
-
Telecom backbone and access networks
-
FTTH and PON systems
-
Fiber patch cords and pigtails
-
ODF frames and fiber cabinets
-
CATV and broadband networks
-
Optical test and measurement equipment
Anywhere stable, low-loss fiber connections are needed, this connector fits in naturally.
Perguntas e respostas profissionais
Q1: Can FC PC and FC APC be connected together?
No. FC PC has a flat end face, while FC APC is angled. Connecting them will cause high loss and may damage the ferrule.
Q2: When should I choose 2.0mm instead of 3.0mm?
2.0mm is typically used for equipment jumpers and indoor patch cords, while 3.0mm is preferred for telecom and backbone cables with higher mechanical strength.
Q3: Is non-adjustable better than adjustable?
For factory-made patch cords and pigtails, yes. Non-adjustable connectors give better consistency, faster assembly, and more stable optical quality.
Comentários
Ainda não há comentários.