Açıklama
Why “bulk components” matter in drop cable factories
In FTTH production lines, the connector itself is only half the story.
What really determines yield, speed, and long-term performance is the component set behind it.
These FC PC bulk components are engineered to deliver:
-
Stable fiber positioning during polishing
-
Reliable strain relief on 2.0mm and 3.0mm drop cables
-
Consistent mechanical fit across large batches
-
Smooth automated or semi-automated assembly
That is why they are widely used by professional manufacturers like Changzhou Fenxi Optoelektronik Technology Co, Ltd.
Designed for 2.0mm & 3.0mm FTTH drop cables
| Kablo Tipi | Tipik Kullanım |
|---|---|
| 2.0mm drop cable | Indoor FTTH, wall outlets, ONT jumpers |
| 3.0mm drop cable | Outdoor FTTH, building entry, backbone to home |
The same component system supports both, reducing tool changes, inventory complexity, and production cost.
Optical and mechanical design goals
| Parametre | Target Performance |
|---|---|
| Konektör Tipi | FC PC |
| Fiber Modu | Tek modlu 9/125 µm |
| Ekleme Kaybı | ≤ 0,30 dB |
| Geri Dönüş Kaybı | ≥ 45 dB |
| Yüksük | Zirconia ceramic |
| Cable Grip | High-strength crimp + boot |
These components are designed to meet telecom-grade FTTH standards, ensuring stable performance from the factory to the customer’s home.
What is included in the bulk set?
| Bileşen | Function |
|---|---|
| FC metal body | Provides threaded FC interface |
| Ceramic ferrule | Fiber alignment and optical contact |
| Crimp sleeve | Locks cable jacket and strength member |
| Boot (2.0/3.0mm) | Strain relief and bending protection |
| Internal holder | Controls fiber and ferrule position |
Together, they form a complete FC PC termination system for drop cable assembly.
Where these components are used
These bulk parts are widely applied in:
-
FTTH drop cable factories
-
Fiber patch cord production lines
-
Telecom pre-connectorized cables
-
Indoor fiber jumper assembly
-
PON and access network cable systems
They are ideal for any company that needs high-volume, stable-quality FC PC drop cables.
Profesyonel Soru-Cevap
Q1: Are these components for finished connectors or for assembly?
They are bulk parts for assembly. They are used by factories to build FC PC connectors on drop cables.
Q2: Can they be used with both 2.0mm and 3.0mm cables?
Yes. The boot and crimp parts are designed to support both 2.0mm and 3.0mm FTTH drop cables.
Q3: Are these suitable for automated production lines?
Yes. The components are designed with consistent tolerances, making them compatible with semi-automatic and fully automatic fiber termination equipment.
Yorumlar
Henüz yorum yok.