Açıklama
3.0mm duplex — built for real cabling paths
| Cable type | Where it performs best |
|---|---|
| 2.0mm | Short jumpers at device ports |
| 3.0mm | Building backbones, floor-to-floor links, ODF routing |
The thicker jacket absorbs pulling forces and reduces micro-bending when fibers are routed through long paths.
Optical transmission characteristics
| Parametre | Tipik değer |
|---|---|
| Elyaf | Tek modlu 9/125 µm |
| Polish type | UPC |
| Ekleme kaybı | ≤ 0,30 dB |
| Geri dönüş kaybı | ≥ 50 dB |
| Çalışma dalga boyları | 1310 / 1550 nm |
| Mating durability | ≥ 1000 döngü |
These values support Ethernet, SDH, metro and access networks with long-term signal stability.
Duplex LC structure
Two fibers are fixed inside one LC duplex housing, ensuring correct Tx/Rx orientation even when cables are moved or serviced.
| Construction | Fayda |
|---|---|
| 1,25 mm seramik yüksükler | Precise core alignment |
| UPC cilalı uç yüzeyler | Low reflection |
| Çift yönlü LC klips | Maintains polarity |
| Thick 3.0mm jacket | Protects against tension |
Profesyonel Soru-Cevap
When should I choose 3.0mm instead of 2.0mm?
When the jumper runs through cable trays, risers, or backbone frames where it may be bent or pulled.
Is this compatible with all LC UPC adapters?
Yes. The LC interface is standard and fits all LC UPC panels and transceivers.
Can this be used for PON systems?
Yes, but for RF overlay or reflection-sensitive PON systems, LC APC is recommended instead.
Yorumlar
Henüz yorum yok.